| Headhunter 9/32" Sling Shaft for Guerrilla |
You are looking at a 9/32" shaft that was specially designed for our Guerrilla sling. We found that the 9/32" diameter shafts were the best diameter. A shaft in this diameter gives you the range and speed...
| Headhunter BAMF Lobster Gloves |
The BAMF Lobster gloves were developed thanks to a collaboration between Headhunter Spearfishing and Cameron Kirkconnell. The gloves are made from a woven Kevlar with industrial cut resistance. The grip...
| Headhunter Lobster & Stone Crab Gauge w/ Bottle Opener |
This multi-tool features a 3" lobster gauge, a 2.75" stone crab claw gauge, and a bottle opener. It is the perfect tool for a great day on the water. The gauge is made from 1/8" 316 stainless steel and...
| Headhunter Reel for Guerrilla |
We offer two different reels for the Guerrilla Sling. The small reel holds 75 feet and the large reel holds 125 feet of line. The two reels come filled with a super stiff spectra line especially made for...
| Headhunter Replacement Band - Nomad Polespear |
This is the stock replacement band for the NOMAD Pole spear.This band is available for the 6, 8 and 9 foot polespear. This band also works for other polespears that require a band stretch close to 61"...
| Headhunter Replacement Band - Predator Polespear |
This is the stock replacement band for the Predator Pole spear. This band also works for other pole spears that require a band stretch close to 61" (5 ft).
| Headhunter Replacement Showstopper Cable Slip Tip |
This is the standard slip tip for the Showstopper tip system. This in an exact replacement of what comes on the Predator pole spears, 6mm Kit, and Riffe kit.
| Headhunter Replacement Showstopper Spectra Slip Tip |
This tip is the same as our normal SHOWSTOPPER tip except it comes rigged with spectra braided line. Not only is the spectra easier to handle and does not kink, it has a breaking strength almost double...
| Headhunter Riffe Style Tip Kit |
This is the Riffe showstopper Kit. To replace the worn injector rod, simply loosen the piece by twisting it counterclockwise and then screw on the new injector rod on to your pole spear. You will need...